InRain® , is engaged in making RWH System based on the modular technology.
It is indeed entirely different from conventional rainwater harvesting systems that were made using cement and brick walls. A few benefits of our scientific RWH system are highlighted as follows.
Monolithic structures are quick to install, and the same turns into a rainwater holding tank below the ground in no time as compared to making a civil pit. Modular tanks can be used for holding/reusing the rainwater, recharging the water table, and percolating.
Using the InRain® filtration system, developed in-house by the ICPL R&D team, clean rainwater is trapped in the tank, thereby saving on maintenance parts tremendously, as it is very easy & handy with negligible maintenance costs as compared to conventional systems. Precious land over the modular tank is not wasted, since it is a load-bearing structure and can bear tons of loads, thereby making the whole system truly economical as compared with the case of having a civil pit.
95% of the capacity of the tank is usable, as compared to only 50-55% usability in the case of a civil pit. There is no risk of accidents, as no one can fall into this kind of tank, whereas having an RCC civil tank is highly accident-prone. Removable and transportable to any other location, which is not possible in the case of a civil pit. Holding/recharge capacity begins from 1 cubic meter to any imaginable size within significantly less time.